Konfigurasi Routing Dinamis RIP Cisco Packet Tracer (2 Router)

Berikut adalah contoh konfigurasi routing dinamis menggunakan dua router di Cisco Packet Tracer. Dalam contoh ini, kita akan mengasumsikan dua jaringan yang terhubung oleh dua router, dan kita akan mengonfigurasi routing dinamis antara keduanya. Proses routing dinamis menggunakan routing RIP.

Konfigurasi Router

Router-1

Konfigurasi IP Address: 

Router-1#conf t
Router-1(config)#int gig0/0
Router-1(config-if)#ip add 1.0.0.254 255.0.0.0
Router-1(config-if)#no sh
Router-1(config)#ex
Router-1(config)#int gig0/1
Router-1(config-if)#ip add 172.16.0.10 255.255.0.0
Router-1(config-if)#no sh

Router-2

Konfigurasi IP Address: 

Router-2#conf t
Router-2(config)#int gig0/0
Router-2(config-if)#ip add 172.16.0.20 255.255.0.0
Router-2(config-if)#no sh
Router-2(config)#ex
Router-2(config)#int gig0/1
Router-2(config-if)#ip add 192.168.0.254 255.255.255.0
Router-2(config-if)#no sh

Cek Tabel Routing: 

Router#sh ip ro

Routing Static Router-1: 

Router-1#conf t

Router-1(config)#router rip

Router-1(config-router)#network 1.0.0.0

Router-1(config-router)#network 172.16.0.0

Routing Static Rotuer-2: 

Router-2#conf t

Router-2(config)#router rip

Router-2(config-router)#network 172.16.0.0

Router-2(config-router)#network 192.168.0.0

Konfigurasi PC
PC-1

IP Address : 1.0.0.1
Netmask    : 255.0.0.0
Gateway    : 1.0.0.254

PC-2

IP Address : 1.0.0.2
Netmask    : 255.0.0.0
Gateway    : 1.0.0.254

PC-3

IP Address : 192.168.0.1
Netmask    : 255.255.255.0
Gateway    : 192.168.0.254

PC-4

IP Address : 192.168.0.2
Netmask    : 255.255.255.0
Gateway    : 192.168.0.254

File : Download