Konfigurasi Routing Static Cisco Packet Tracer (2 Router)

Berikut adalah contoh konfigurasi routing static menggunakan dua router di Cisco Packet Tracer. Dalam contoh ini, kita akan mengasumsikan dua jaringan yang terhubung oleh dua router, dan kita akan mengonfigurasi routing statis antara keduanya.

Konfigurasi Router

Router-1

Konfigurasi IP Address:

Router-1#conf t
Router-1(config)#int gig0/0
Router-1(config-if)#ip add 1.0.0.254 255.0.0.0
Router-1(config-if)#no sh
Router-1(config)#ex
Router-1(config)#int gig0/1
Router-1(config-if)#ip add 172.16.0.10 255.255.0.0
Router-1(config-if)#no sh

Router-2

Konfigurasi IP Address:

Router-2#conf t
Router-2(config)#int gig0/0
Router-2(config-if)#ip add 172.16.0.20 255.255.0.0
Router-2(config-if)#no sh
Router-2(config)#ex
Router-2(config)#int gig0/1
Router-2(config-if)#ip add 192.168.0.254 255.255.255.0
Router-2(config-if)#no sh

Cek Tabel Routing:

Router#sh ip ro

Routing Static Router-1:

Router-1#conf t
Router-1(config)#ip route 192.168.0.0 255.255.255.0 172.16.0.200

Routing Static Rotuer-2:

Router-2#conf t
Router-2(config)#ip route 1.0.0.0 255.0.0.0 172.16.0.100

Konfigurasi PC

PC-1

IP Address : 1.0.0.1
Netmask : 255.0.0.0
Gateway : 1.0.0.254

PC-2

IP Address : 1.0.0.2
Netmask : 255.0.0.0
Gateway : 1.0.0.254

PC-3